> ## Documentation Index
> Fetch the complete documentation index at: https://dragonwingdocs.qualcomm.com/llms.txt
> Use this file to discover all available pages before exploring further.

# Get started with RTSS 

This section provides instructions on how to set up the infrastructure, build, and flash RTSS firmware.

<br />**Prerequisites**

Before you begin, set up your infrastructure as described in [BSP image build with firmware](https://dragonwingdocs.qualcomm.com/Key-Documents/Firmware-Guide/build-firmware).

The Linux build guide describes the common build workflows and flashing instructions.

## **RTSS workflow**

<br />The following figure shows the workflow to get started with RTSS on your device.

<Frame>
  <img src="https://mintcdn.com/qualcomm-prod/JwbHRt6lsXOlA2Go/System/FreeRTOS/media/get_started_with_rtss.png?fit=max&auto=format&n=JwbHRt6lsXOlA2Go&q=85&s=e57ea740b8b121a0ff6c50c063749128" alt="get_started_with_rtss.png" width="1099" height="165" data-path="System/FreeRTOS/media/get_started_with_rtss.png" />
</Frame>

1. For instructions about downloading and building RTSS, see [Build RTSS firmware](Build-RTSS-firmware).
2. For instructions about flashing RTSS, see [Flash SAIL](https://dragonwingdocs.qualcomm.com/Key-Documents/Flash-Guide/flash-with-qdl#flash-sail) in the build guide.

To validate RTSS, see [Debug RTSS](Debug-RTSS) and [RTSS test commands](RTSS-test-commands).

**Related documents:**

For supported hardware information, see [Get familiar with the board](https://dragonwingdocs.qualcomm.com/Linux/devices/iq9075-evk/device-overview) in the *Qualcomm Dragonwing IQ-9075 Evaluation Kit quickstart – Linux* documentation.

## **Next steps**

* [RTSS architecture](RTSS-architecture)
* [Build RTSS firmware](Build-RTSS-firmware)
* [Add partitions to SPINOR flash memory](Add-partitions-to-SPINOR-flash-memory)

<br />