Header: spf/api/modules/dls_api.h
Structures
dls_param_id_config_buffer_t
Payload for #DLS_CMD_CONFIG_BUFFER.
Members
Lower 32-bits of the 64-bit buffer starting address.
Upper 32-bits of the 64-bit buffer starting address.
Unique identifier for a shared memory address.
Total allocated buffer size for the data logging service.
Maximum one single log packet size.
This parameter is used to differentiate between the buffer configuration before starting the data logging and deconfiguration when the data logging is complete 1 - Configuration at the beginning to use the given memory space for the data logging.
dls_param_id_enable_disable_log_code_t
Payload for DLS_PARAM_ID_ENABLE_DISABLE_LOG_CODE.
Members
Flag to indicate the log code is requested to be enabled or disabled.
Number of log codes to enable/disable.
This is a Flexible Array Member to list the log codes to be enabled/disabled.
dls_buf_start_addr_t
Members
This field contains the lower 32-bits of the 64-bit buffer starting address.
This field contains the upper 32-bits of the 64-bit buffer starting address.
Unique identifier for a shared memory address.
dls_data_event_id_commit_log_buffer_t
Payload for DLS_DATA_CMD_BUFFER_RETURN.
Members
Total number of logged buffers that are committed.
This is a flexible array member and it contains the following: lower 32-bits of the 64-bit buffer starting addresses upper 32-bits of the 64-bit buffer starting addresses.
dls_data_cmd_buffer_return_t
Payload for DLS_DATA_CMD_BUFFER_RETURN.
Members
Total number of buffers that need to be returned.
This field contains the 64-bit buffer starting addresses.
dls_buf_hdr_t
Members
It indicates the size of the data logged into the buffer.
It indicates the current state of a data logging buffer.
It indicates the available buffer space in percentage.
Type Definitions
dls_param_id_config_buffer_t
dls_param_id_enable_disable_log_code_t
dls_buf_start_addr_t
dls_data_event_id_commit_log_buffer_t
dls_data_cmd_buffer_return_t
dls_buf_hdr_t
Enumerations
dls_buf_state_t
Used to identify the state of the buffer.
Values
Macros
DLS_MODULE_INSTANCE_ID
Identifier for an instance of the Audio Logging Server module.
DLS_PARAM_ID_CONFIG_BUFFER
Used to configure the data logging service buffer information.
DLS_PARAM_ID_ENABLE_DISABLE_LOG_CODE
Used to configure the log code to start/stop the data logging.
DLS_DATA_EVENT_ID_COMMIT_LOG_BUFFER
Used to let the client know that a buffer of data is logged and is ready to be read at client side.
DLS_DATA_CMD_BUFFER_RETURN
Used to return the logged buffer.
