检测固件 capsule 更新
- 日志条目：在 UEFI 阶段，capsule 加载大容量存储 capsule 文件
capsule1.fv'!，并开始处理大容量存储 capsule 文件capsule1.fv'!。 - 描述：该日志表明系统已检测到 capsule。系统触发并处理 capsule 更新。
Detect capsule
UEFI Start [ 1570]
- 0x09FC01000 [ 1573] Sec.efi
ASLR : ON
DEP : ON (RTB)
Timer Delta : +1 mS
RAM Entry 0 : Base 0x0080000000 Size 0x003A800000
RAM Entry 1 : Base 0x00C0000000 Size 0x0001800000
RAM Entry 2 : Base 0x00C3400000 Size 0x003CC00000
RAM Entry 3 : Base 0x0100000000 Size 0x0100000000
Total Available RAM : 6028 MB (0x0178C00000)
Total Installed RAM : 6144 MB (0x0180000000)
Multithread : ON (Lib ver 1.2)
Init Cores : 2
Init CPU core 1
Scheduler up on Core 1
CONF File : uefiplatLA.cfg
UEFI Ver : 6.0.xxx.xxx.xxx.1.0.c1-xxxx.1-KODIAKLA-1
Build Info : 64b Nov 27 2024 15:04:28
Boot Device : UFS
PROD Mode : FALSE
Retail : FALSE
DTB config : client[0]..trace[0]..verbose[0]
- 0x09EDD0000 [ 1628] DxeCore.efi
Loading DxeCore at 0x009EDD0000 EntryPoint=0x009EDD1000
HOBLIST address in DXE = 0x9EBC1018
FV Hob 0x9FC00000 - 0x9FFEFFFF
FV Hob 0x9EE0F000 - 0x9F1DBFFF
FV2 Hob 0x9EE0F000 - 0x9F1DBFFF
631008B0-B2D1-410A-8B49-2C5C4D8ECC7E - 00000000-0000-0000-0000-000000000000
>>> Cluster 0: 1804800000 Hz
>>> Cluster L3: 1516800000 Hz
PM0: 47, PM1: 63, PM2: 49, PM8: 46,
Module cannot re-initialize DAL module environment
UFS INQUIRY ID: SAMSUNG KM2L9001CM-B518 0700
UFS Boot LUN: 1
tz_armv8_smc_call failed, TzStatus = 0xFFFFFFFF, SmcId = 0x32000105
Status = 0x3
APP_REGION_NOTIFICATION_CMD: Syscall Not Supported, status 3
QseeResponse->result = 0xE
Status = 0x7
QseeResponse->result = 0xE
Status = 0x7
Image partition label not found
EFI_QseecomStartApp: Load from partition (featenabler_a)Failed: Status(0x800000000000000E), appId(0)
QseeResponse->result = 0xE
Status = 0x7
QseeResponse->result = 0xE
Status = 0x7
Image partition label not found
EFI_QseecomStartApp: Load from partition (featenabler)Failed: Status(0x800000000000000E), appId(0)
Image partition label not found
LoadImageFromPartitionUsingGuid Failed: 14
EFI_QseecomStartApp: Load Failed: Status(0x800000000000000E)
Failed to start featenabler_a TA, status = 14
- 0x09CA2C000 [ 1836] DisplayDxe.efi
DisplayUtils: mount logfs system failed with status 14!
DisplayUtils: mount logfs system failed with status 14!
DisplayUtils: mount logfs system failed with status 14!
DisplayDxe: Panel ID:0x00000000 [LCD]
DisplayDxe: Resolution 1920x1080 (1 intf)
pil-imagefv Done t=10ms s=2ms a=3ms f=3ms
fast_core_num val: 0
UsbConfigLibOpenProtocols: PMI version (0x0)
UsbConfigLibOpenProtocols: gPmicNpaClientHS2 cannot be created
UsbConfigInit: Dual Role Enabled on Port Number: 0
UsbConfigInit: after setting role
UsbConfigInit: UsbConfigInit, not start on port: 0, mode 0
UsbConfigInit: Dual Role Enabled on Port Number: 1
UsbConfigInit: after setting role
UsbConfigInit: UsbConfigInit, not start on port: 1, mode 0
UsbConfigInit: UsbPwrCtrl No. of Ports = 1
UsbConfigPortsQueryConnectionChange: usbport->connectstate: ATT
ConnectSts : Attach, Data Role : UFP (DEVICE Mode), Lane : CC1, CoreNum : 0
HandlePortPartnerXtach: Cable Attach core 0, portmode 1, dualmode 1
ButtonsDxeTest: Keypress SDAM data payload 0
Current SysFwVersion Entry info:
====================================
Signature : 5245565746535953
Revision : 0x10000
VersionDataCrc32 : 0xD6AE50A5
FwVersion : 0x10000
LowestSupportedFwVersion : 0x0
====================================
Platform: QCS6490 IOT
Selected FW GUID =: 6F25BFD2-A165-468B-980F-AC51A0A45C52
Platform = 20
- 0x09C885000 [ 1981] SoftSKUDxe.efi
SoftSKUDxeInitialize: SoftSKU not supported for this chip
Error: Image at 0009C885000 start failed: Unsupported
- 0x09C885000 [ 1984] MinidumpTADxe.efi
MinidumpTADxe: Minidump TA loading not enabled.
BDS Entry [ 1993]
Disp init wait [ 1993]
DisplayUtils: mount logfs system failed with status 14!
MDP_Display_LoadFileEx: Failed to mount imagefv_a partition, eStatus=Not Found
MDP_Display_LoadFileEx: load file from imagefv_a failed with status(5), So loading default image!
-----------------------------
Platform Init [ 2065] BDS
Boot Cycle : 34
Run Cycle : 34
UEFI Ver : 6.0.xxxxx.xxxx.xxx.1.0.c1-00xxx-xxxx-1
Platform : IOT
Subtype : 2
Boot Device : UFS
Chip Name : xxxxx
Chip Ver : 1.0
Chip Serial Number : 0xDF4B18A2
Boot Core : 1804 MHz
-----------------------------
- 0x09C70F000 [ 2083] QcomChargerApp.efi
EFI partition block size: 4096
No pending capsules found in EFI Raw file
Starting to flush any pending persisted capsules from media
Could not find 'BootOrder' variable to find EFI partition with mass-storage capsules!
Looking for local EFI partition variable to find EFI partition with mass-storage capsules
Loading mass-storage capsule file 'capsule1.fv'!
Starting to process mass-storage capsule file 'capsule1.fv'!
FmpDxe(Qualcomm System Firmware Update Driver): CheckTheImage() - No dependency associated in image.
V3 payload found
V3 payload found
NewImage Version - 0x30004
NewImage LowestSupportedImageVersion - 0x0
Current Version (partition) - 0x10000
Current LowestSupportedImageVersion (partition) - 0x0
固件备份、更新和更新后处理
- 日志条目：
- 阶段 1：固件条目备份开始，阶段 1 完成。
- 阶段 2：固件条目更新开始，阶段 2 完成。
- 阶段 3：固件条目更新后处理开始，阶段 3 完成。
-
描述：日志文件为成功的固件更新提供标记，并通过其条目指示更新过程中所描述的各个阶段。
Firmware update
Attempting to start: Firmware update Current SysFwVersion Entry info: ==================================== Signature : 5245565746535953 Revision : 0x10000 VersionDataCrc32 : 0xD6AE50A5 FwVersion : 0x10000 LowestSupportedFwVersion : 0x0 ==================================== Current FW update attempt count is: 1 Current FW update state is: FW_STATE_NOT_IN_PROGRESS Successfully synced all UEFI tables Rendering Progress: 1 Parsing payload... V3 payload found Payload info: ==================================== Revision : 3 Header size (Byte) : 24 FwVer : 0x30004 Lowest supported version : 0x0 Breaking change number : 0 Entry count : 10 ==================================== Current breaking change number is 0 Payload breaking change number is 0 Double update not required ACTIVE LUN: 1 1 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = imagefv_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = imagefv_b FileName = FwEntry Encrypted = False ==================================== 2 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = uefi_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = uefi_b FileName = FwEntry Encrypted = False ==================================== 3 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = aop_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = aop_b FileName = FwEntry Encrypted = False ==================================== 4 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = hyp_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = hyp_b FileName = FwEntry Encrypted = False ==================================== 5 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = tz_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = tz_b FileName = FwEntry Encrypted = False ==================================== 6 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = cpucp_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = cpucp_b FileName = FwEntry Encrypted = False ==================================== 7 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = shrm_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = shrm_b FileName = FwEntry Encrypted = False ==================================== 8 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = multiimgoem_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = multiimgoem_b FileName = FwEntry Encrypted = False ==================================== 9 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = xbl_ramdump_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = xbl_ramdump_b FileName = FwEntry Encrypted = False ==================================== 10 FwEntry found... FwEntry: ==================================== Operation = 0x1,{UPDATE} UpdateType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = uefisecapp_a FileName = BackupType = 0x0,{Partition} DiskPartitionType = 0xC,{LUN4} PartitionName = uefisecapp_b FileName = FwEntry Encrypted = False ==================================== Validating FwEntry list... FwEntry list validated. Totally 10 FwEntries found Rendering Progress: 5 Successfully synced all UEFI tables : Failed to get ResetPhase test hook data with error: Not Found Phase 1: FwEntry Backup start. Time (ms): 2631 Rendering Progress: 6 GPT-Data Compression Statistics:: OriginalSize: 5900, CompressedSize: 594 Successfully synced all UEFI tables Backing up 1/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 1 Rendering Progress: 6 Backing up 2/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 3 Rendering Progress: 7 Backing up 3/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 3 Rendering Progress: 7 Backing up 4/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 4 Rendering Progress: 7 Backing up 5/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 5 Rendering Progress: 8 Backing up 6/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 45 Rendering Progress: 25 Backing up 7/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 59 Rendering Progress: 31 Backing up 8/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 61 Rendering Progress: 32 Backing up 9/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 99 Rendering Progress: 49 Backing up 10/10 FwEntry... Backup Success Progress span of current phase: [6, 50]. Progress value within this span in (0-100 scale): 100 Rendering Progress: 50 Successfully synced all UEFI tables Rendering Progress: 50 Phase 1 Done. Time (ms): 3048 : Failed to get ResetPhase test hook data with error: Not Found Phase 2: FwEntry Update start. Time (ms): 3050 Rendering Progress: 51 Updating 1/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 1 Rendering Progress: 51 Update Success Updating 2/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 3 Rendering Progress: 52 Update Success Updating 3/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 3 Rendering Progress: 52 Update Success Updating 4/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 4 Rendering Progress: 52 Update Success Updating 5/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 5 Rendering Progress: 52 Update Success Updating 6/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 45 Rendering Progress: 68 Update Success Updating 7/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 59 Rendering Progress: 74 Update Success Updating 8/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 61 Rendering Progress: 74 Update Success Updating 9/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 99 Rendering Progress: 89 Update Success Updating 10/10 FwEntry... Progress span of current phase: [51, 90]. Progress value within this span in (0-100 scale): 100 Rendering Progress: 90 Update Success Successfully synced all UEFI tables Rendering Progress: 90 Phase 2 Done. Time (ms): 3190 : Failed to get ResetPhase test hook data with error: Not Found Phase 3: FwEntry Post Update start. Time (ms): 3192 Rendering Progress: 91 Deleting 1/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Deleting 2/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Deleting 3/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Deleting 4/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Deleting 5/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Deleting 6/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Deleting 7/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Deleting 8/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Deleting 9/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Deleting 10/10 FwEntry from backup device path... Delete skipped as delete operation not applicable for this FwEntry...Continue Successfully synced all UEFI tables Successfully synced all UEFI tables Successfully synced all UEFI tables Rendering Progress: 95 Phase 3 Done. Time (ms): 3230 Successfully synced all UEFI tables Successfully synced all UEFI tables Firmware update completed successfully Attempting to update SysFw Partition Entry
删除大容量存储 capsule 文件
- 日志条目：正在删除 capsule 文件中的大容量存储：
capsule1.fv'!。 - 描述：系统在处理完固件更新后删除 capsule。
Delete capsule
> Writing updated SysFwVer details into SysFwVer partition...
> Current SysFwVersion Entry info:
> ====================================
> Signature : 5245565746535953
> Revision : 0x10000
> VersionDataCrc32 : 0x1F2CFF54
> FwVersion : 0x30004
> LowestSupportedFwVersion : 0x0
> ====================================
> Successfully synced all UEFI tables
> Updated SysFw Partition Entry
> Platform: QCS6490 IOT
> Selected FW GUID =: 6F25BFD2-A165-468B-980F-AC51A0A45C52
> Platform = 20
> Successfully synced all UEFI tables
> Deleting mass-storage capsule file 'capsule1.fv'!
> Starting to flush any pending persisted capsules from media
> !!Warning!! Could not clear 'BootNext' variable after processing mass-storage capsules. Status - Not Found!
> Write Log Buffer to FAT partition after capsule update failed, Status = (Unsupported)
> INFO: Received ResetSytem request.
> INFO: Type :0x0
> INFO: DataSize :0x0
> Start EBS [ 4674]
> MDPLib: Halt vbif axi failed!
> BDS: LogFs sync skipped, Unsupported
> Successfully synced all UEFI tables
> Sync Duration = 16 ms
> Warning: Clearing A-bit !
> App Log Flush : 0 ms
> ScmArmV8ExitBootServicesHandler, Status = 0x0.
> Gunyah based bootup
> Exit EBS [ 4719] UEFI End
> UEFI Start [ 1587]
> - 0x09FC01000 [ 1590] Sec.efi
> ASLR : ON
> DEP : ON (RTB)
> Timer Delta : +0 mS
> RAM Entry 0 : Base 0x0080000000 Size 0x003A800000
> RAM Entry 1 : Base 0x00C0000000 Size 0x0001800000
> RAM Entry 2 : Base 0x00C3400000 Size 0x003CC00000
> RAM Entry 3 : Base 0x0100000000 Size 0x0100000000
> Total Available RAM : 6028 MB (0x0178C00000)
> Total Installed RAM : 6144 MB (0x0180000000)
> Init CPU core 1
> > Scheduler up on Core 1
> UEFI Ver : 6.0.xxxx.xx.xxx.1.0.c1-xxx-xxxx-1
> Build Info : 64b Nov 5 2024 10:08:42
> Boot Device : UFS
> PROD Mode : TRUE
> Retail : TRUE
> After Create Event Status (0x0)
> ShmBridgeInitialize: enable status 0
> PM0: 47, PM1: 63, PM2: 49, PM8: 46,
> Module cannot re-initialize DAL module environment
> UFS INQUIRY ID: SAMSUNG KM2L9001CM-B518 0700
> UFS Boot LUN: 1
> tz_armv8_smc_call failed, TzStatus = 0xFFFFFFFF, SmcId = 0x32000105
> Status = 0x3
> APP_REGION_NOTIFICATION_CMD: Syscall Not Supported, status 3
> HW Wdog Setting from PCD : Disabled
> QseeResponse->result = 0xE
> Status = 0x7
> QseeResponse->result = 0xE
> Status = 0x7
> QseeResponse->result = 0xE
> Status = 0x7
> QseeResponse->result = 0xE
> Status = 0x7
> LoadImageFromPartitionUsingGuid Failed: 14
> Failed to start featenabler_a TA, status = 14
> DisplayDxe: Resolution 1920x1080 (1 intf)
> smem_alloc_ex: SMEM alloc_ex failed with err=-3! smem_type=478, remote=3, size=32, flags=0x40000000.smem_alloc_ex: SMEM alloc_ex failed with err=-3! smem_type=478, remote=12, size=32, flags=0x40000000.smem_alloc_ex: SMEM alloc_ex failed with err=-3! smem_type=478, remote=17, size=32, flags=0x40000000.smem_alloc_ex: SMEM alloc_ex failed with err=-3! smem_type=478, remote=18, size=32, flags=0x40000000.fast_core_num val: 0
> UsbConfigLibOpenProtocols: PMI version (0x0)
> UsbConfigLibOpenProtocols: gPmicNpaClientHS2 cannot be created
> UsbConfigInit: after setting role
> UsbConfigInit: UsbConfigInit, not start on port: 0, mode 0
> UsbConfigInit: after setting role
> UsbConfigInit: UsbConfigInit, not start on port: 1, mode 0
> UsbConfigPortsQueryConnectionChange: usbport->connectstate: ATT
> ButtonsDxeTest: Keypress SDAM data payload 0
> HypDtFixupEntryPoint : Reading of OsConfigTableSelection failed,checking DT setting
> Selected FW GUID =: 6F25BFD2-A165-468B-980F-AC51A0A45C52
> Platform = 20
> SoftSKUDxeInitialize: SoftSKU not supported for this chip
> MinidumpTADxe: Minidump TA loading not enabled.
> Disp init wait [ 1998]
> -----------------------------
> Platform Init [ 2063] BDS
> UEFI Ver : 6.0.xxx.xxx.xxx.1.0.c1-xxxx-xxxx-1
> Platform : IOT
> Subtype : 2
> Boot Device : UFS
> Chip Name : xxxxx
> Chip Ver : 1.0
> Chip Serial Number : 0xDF4B18A2
> -----------------------------
> No pending capsules found in EFI Raw file
> No pending capsules found in EFI\UpdateCapsule folder
> LocateProtocol(DPP) returned Status:Not Found
> Locate pMorPpiProtocol failed 0xE 00000010
> Platform Init End : 2219
> -----------------------------
> Compatible OS DTB found. Model = Qualcomm Technologies, Inc. Robotics RB3gen2 addons vision mezz platform
> Reading of OsConfigTableSelection failed,checking DT settings
> ERROR: DisableDisplay disabling,Status=0
> SdccDxeFixupEventNotifyFunc: non-removable node not found
> Added qcom,platform-parts-info successfully in BoardInfoDxe
> Failed to get SKU information. Unsupported
> UEFI Total : 854 ms
> POST Time [ 2441] OS Loader
> systemd-boot@0x1c22e0000 254.4
> systemd-stub@0x1d1f80000 254.4
> EFI stub: Booting Linux Kernel...
> EFI stub: Loaded initrd from LINUX_EFI_INITRD_MEDIA_GUID device path
> EFI stub: Using DTB from configuration table
> EFI stub: Exiting boot services...
> Start EBS [ 2705]
> BDS: LogFs sync skipped, Unsupported
> App Log Flush : 0 ms
> ScmArmV8ExitBootServicesHandler, Status = 0x0.
> Gunyah based bootup
> ```